Bluon Embeddings API

POST {{base_url}}/embedding/training/search

curl -X 'POST' \
  'https://test.hub.bluontoolbox.com/uat/embedding/training/search' \
  -H 'accept: application/json' \
  -H 'Authorization: Bearer [YOUR_TOKEN]' \
  -H 'Content-Type: application/json' \
  -d '{
    "query": {
      "inputs": {
        "text": "Compressor will not start, what should I do?"
      },
      "top_k": 3
    }
  }'

{
  "usage": {
    "embed_total_tokens": 14,
    "read_units": 1
  },
  "result": {
    "hits": [
      {
        "_id": "training_1005",
        "_score": 0.5785589814186096,
        "fields": {
          "QC Date": "6/11/24",
          "brand": "Airtemp",
          "calling_group": "Residential Condenser",
          "model_details": "5 Tons 208-230V 1Ph R-410A",
          "model_number": "VSH3BE4M1SP60K",
          "text": "Problem: Compressor not starting, just humming, fan comes on, no attempt from compressor to start. Static refrigerant pressure on both lines is 250. Meter readings at compressor terminals are not as expected.\nSolution: Based on the symptoms and meter readings, it appears the compressor may be mechanically locked up internally. To troubleshoot further, reconnect all components, and with power off, measure the amp draw on the black wire between the contactor and compressor. A high amp draw may indicate a locked compressor. Consult with your boss about trying a hard start kit, understanding the potential risks of causing a burnout. Consider replacing the contactor, compressor, and capacitor. Monitor the situation closely to avoid damaging the system further.\nBrand: Airtemp\nModel: VSH3BE4M1SP60K\nModel Details: 5 Tons 208-230V 1Ph R-410A\nEquipment Type: Residential Condenser",
          "unit_type": "Residential Condenser"
        }
      },
      {
        "_id": "training_3080",
        "_score": 0.5634335875511169,
        "fields": {
          "QC Date": "6/24/24",
          "calling_group": "Refrigeration",
          "text": "Problem: The Embraco compressor is not starting properly, pulling high amps, and feels seized up. The system may have blockages causing the issue.\nSolution: 1. Recover some refrigerant to ensure it's not overcharged. 2. Disconnect the compressor from the system and run it briefly to check if it can start. 3. Check the filter dryer and cap tube for blockages by using nitrogen to blow through them. 4. Consider replacing the compressor with a new one, along with the filter dryer and possibly the cap tube. 5. Avoid shaking or damaging the compressor to prevent a short circuit. 6. Check and confirm correct wiring to capacitor terminals. 7. Utilize a better quality meter like a Fluke for accurate readings and troubleshooting. 8. Remove the compressor carefully to avoid any damage to the system.\nEquipment Type: Refrigeration",
          "unit_type": "Refrigeration"
        }
      },
      {
        "_id": "training_2117",
        "_score": 0.5577990412712097,
        "fields": {
          "QC Date": "6/17/24",
          "calling_group": "Commercial Package Unit",
          "text": "Problem: Compressor contactor not engaging\nSolution: Check for 24 volts at the coil of the compressor contactor. Verify operation of pressure switches and low-pressure switch. Ensure proper control voltage is reaching the contactor. Review manufacturer's wiring diagrams for proper connections and troubleshoot any discrepancies. Consider checking for refrigerant levels in the system as low pressure could prevent the compressor from starting.\nEquipment Type: Commercial Package Unit",
          "unit_type": "Commercial Package Unit"
        }
      }
    ]
  }
}

POST {{base_url}}/embedding/manuals/search

curl -X 'POST' \
  'https://test.hub.bluontoolbox.com/uat/embedding/manuals/search' \
  -H 'accept: application/json' \
  -H 'Authorization: Bearer [YOUR_TOKEN]' \
  -H 'Content-Type: application/json' \
  -d '{
    "query": {
      "inputs": {
        "text": "What is the part number for the indoor control board?"
      },
      "top_k": 3,
      "filter": {
        "manual_id": {
          "$in": [
            "0A0B0755-AB17-41BC-B90D-30EA43DF23F3",
            "0A0D7D75-318E-467C-8B81-8C90B74FCE11",
            "0A5F8898-71AA-4D01-A918-466CEF71828B"
          ]
        }
      }
    }
  }'